Air Humidity Control for the Electronics Industry

Desiccant Dehumidifier

Condair DA Series

Condair DA desiccant dryers are designed to be used especially when an extremely low relative humidity of 10 - 20% RH is needed, such as in industrial drying processes, or where there are very low temperatures to deal with.

The devices’ powerful sorption rotors mean that they can be used to bring humidity values down to a minimum at temperatures as low as -22°F (-30°C).

Standard designs have drying capacities of 7lbs/h – 40lbs/h (0.45 kg/h –182 kg/h).

Desiccant rotors often require pre and post heating or cooling modules. To accommodate this, Condair designed its unit to have flat, easily connectable side panels. Post cooling in particular is often necessary due to the heat given off by the dry air and should be taken into account early in the planning process.

The sorption rotor used in Condair desiccant dryers is silicone-free. The drying agent is neither respirable nor flammable.

In addition to 6 models in 208V and the 7 models in 480V with dehumidification capacities from 1.32 to 44lbs/hr for process air flows from 300 to 2400 CFM, the DA dryers are also available as a range of special models.

The need for dehumidification in the electronics industry.

The storage of electronic components and finished products presents many challenges due to the high sensitivity of the various operating processes. This sensitivity increases especially when large quantities of electronic components are stored, often for long periods of time.

The longer they are stored, the greater the risk that even minor adverse storage conditions will damage them and make them unusable for further use. Precisely controlled and optimized dehumidification is therefore paramount for the safe and successful storage of components and can save companies from costly damage.

Learn more: Condair Electronics Industry brochure

Contact your local TBCo branch to learn more about humidity control products from Condair.